Assembly instruction 300 ml dispenser holder 1. Requirements: drill, level, screwdriver, plugs + screws (included) 2. Tape the supplied instruction level on the wall using the spirit level. The horizontal line above will be the top of the holder. 3. Drill the number of holes required at the location of the crosses. 4. (1 holder = 2 pieces, 2 holders = 4 pieces and 3 holders = 6 pieces) 5. Put the plugs in the holes. 6. Screw the holder into the top hole on the wall. 7. Check with the level if the holders hang at the same height. 8. Then screw the holder into the bottom hole. Use the level to check whether the holders are level in the vertical direction. 9. Correct if necessary.
Back
